Protect STC is a surface tolerant coloured epoxy coating, it has excellent film build properties and is generally used as a high build undercoat / intermediate coating. Protect STC can be used in areas where blast cleaning cannot be carried due to cost or environmental restrictions and has excellent adhesion to ISO 8501 St3 prepared steelProtect STC has excellent adhesion to most aged coatings and has a high film build by brush. See data sheet for more information

• Thinner Thinner No 5
• Colour Grey / Redbrown (other colours available subject to minimum to order)
• Specific gravity Approx. 1.44 kg/L (Mixed Product)
• Theoretical spreading rate At 150 μm d.f.t. 5.5 m²/L
• Volume solids 82%
• VOC148 grams per litre
• Packaging 5 and 20 Litre
• Dry temperature resistance 120°C
• Application Equipment Airless Spray (Tip size 0.019 – 0.021 inch) Roller Brush
• Mixing Ratio Volume: Base – hardener 4-1
• Mixing Instructions Use a power mixer either an air motor or explosion proof electric motor. The components should be mixed homogeneously