Protectosil SC 1000

Fluorine containing formulation based on silane chemistry for an easy-to-clean treatment of porous, mineral surfaces.

Protectosil SC 1000

Protectosil® SC 1000 is suited for an easy-to-clean treatment of many mineral substrates. Protectosil® SC 1000 may be used undiluted or may be diluted using alcohols (such as ethanol or isopropanol) or xylol. The exact amount to be applied, suitable dilution rate and mode of application is highly depending on the porosity of the subsrate and should be determined on a small test patch. The facade to be treated must be clean and the surface dry. Dirt, grime, efflorescence, algae and moss must be removed. High pressure or water vapour cleaning is suitable. Water absorbed during cleaning must be allowed to dry so that the surface is dry before application begins. Imperfections such as cracks, cracked joints or defective seams must be repaired using appropriate methods. Mortar used for repairs must be fully cured and surface dry. The application is recommended if air and substrate temperatures are between 5 °C and 40 °C. Protectosil® SC 1000 should not be applied during rain or strong wind. In the case that a water repellent agent such as Protectosil® BHN or a corrosion inhibitor such as Protectosil® CIT have been applied the substrate has to set for at least 5 days before Protectosil® SC 1000 is applied.

 

Technical Information

    Treated porous, mineral substrates show excellent water and oil repellency
    Treated surfaces remain clean for longer times and are more easy to clean (common liquids like coffee, coke, oils and dark liquids are easily removed)
    Weakens the adhesion of chewing gum or posters to e.g. facades
    Slows down the growth of microorganisms such as mold and algae
    Helps avoid unsightly dark water streaks
    Is highly reactive and resistant against alkali
    Generates watervaporpermeable, colorless impregnation
    No formation of sticky silicone films
    Is suited for the treatment of water repellent substrates

Buy online

Protectosil 008 - £68.56 per Kg

Packed in 25 Kg Plastic jerry cans

Quantity: