Protectosil CIT

Advanced corrosion inhibitor for steel reinforced concrete based on organofunctional silanes.

Protectosil CIT

The concrete surface must be clean. All traces of dirt, dust, efflorescence, mold, grease, oil, asphalt, laitance, paint, coatings, curing compounds, and other foreign materials that would inhibit penetration have to be removed. Acceptable cleaning methods include shotblasting, sandblasting, waterblasting, grinding, and chemical cleaning.

 

Technical Information

Dramatically reduces the chloride induced corrosion of steel concrete reinforcement via reaction of active material with the cement phase and the steel surface
Repassivates steel rebars after chloride induced corrosion
Meets the requirements of EN 1504-2
Is highly reactive and resistant to alkaline environment
Forms colorless and water vapour permeable impregnations
High reduction of water uptake and of chloride uptake
Is applied undiluted to a concrete surface and is absorbed quickly
Penetrates deeply into the concrete
Is suited for old and new structures
Is suited for every type of steel reinforced concrete
Is effective in marine environments with high relative humidity and areas where deicer salts are used such as jetties, piers, decks, facades, balconies, walkways, bridge decks, beams, columns
Effectively inhibits macrocell (mat-to-mat) and microcell (along rebar) corrosion of steel-reinforced concrete
Reduces corrosion in carbonated concrete steel-reinforced structures
Equalizes the differences in electrochemical potential between polymer concrete and existing concrete when applied to concrete structures repaired with polymer concrete
Can be used according to principles 1, 2, 8 and 11 of EN 1504-9


Buy online

Protectosil 008 - £68.56 per Kg

Packed in 25 Kg Plastic jerry cans

Quantity: