Protectosil 266

Silane based water repellent for mineral-based building materials

Protectosil 266

Protectosil® 266 is a free-flowing colorless to slightly yellow, frost resistant liquid based on a silane/ siloxane. Protectosil® 266 can be applied at full-strength or after dilution with suitable solvents, such as ethanol or white spirit.

 

Technical Information

For waterproofing absorbent mineral facade construction materials such as: plaster facades, sand-lime brickwork, brickwork,autoclaved aerated concrete and cement fiber board. The substrates to be treated should be air-dry and clean in order to ensure deep penetration of the active

ingredient. During application the outside temperature and the temperature of the substrate should be within the range from 5 to 40 °C. The material should not be applied if there is a strong wind or if it is raining. The material must not come into contact with water either before or during use. Protectosil® 266 can be applied at full-strength or after dilution with suitable solvents. We recommend a minimum application concentration of 20% by weight (which corresponds to 1 part Protectosil® 266 and 4 parts solvent).


Product Characteristics:
water vapor permeable, colorless impregnation
not film-forming
effective on hairline cracks up to 0.3 mm
good reduction of the water absorption
good penetration
suitable as a primer for facade topcoat
frost resistant

 


Buy online

Protectosil 008 - £68.56 per Kg

Packed in 25 Kg Plastic jerry cans

Quantity: